Skip to main content

Cetus2 Extruder Head Dive into Bed?



  • syntaxgeek

    Jason, this was very helpful for resolution of this exact issue, thanks!

  • ljack

    Jason Wu
    This helped for the extruder crashing in the bed problem. After loosening the 2 screws and moving the detected PCB closer to magnet it stopped to crashing, but now the print area has moved about 2 cm to the right. Any suggestion how to move the print area 2cm to left, to it's original position? Using the new klipper / wand server.



    Also sometimes the Y support crashes to the right and makes loud noice while e.g. homing, is this preventable somehow?


Please sign in to leave a comment.