Avatar

Jason Wu

  • Total activity 59
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 1
  • Subscriptions 33

Articles

Votes on activity by Jason Wu Sort by votes Recent activity Votes
  • Cetus - How To Fix Unleveled Y-axis

    Since we have a few reports about mechanically unleveled Y-axis. While investigating the cause of the problem, here we put together a short tutorial  for your to fix it. The leveling of the Y axis ...

  • 4.1 Matrix Leveling (manual and automatic)

    The Mechanism Tiertime Matrix Leveling can effectively reduce the effect of tilt and uneven surface of build platform. The leveling will not affect the print's dimensional accuracy in contrary to o...

  • Cetus MK2 to MK3 Upgrade

    Tools Needed: 1. Hex Key 2.5mm 2. Hex Key 3.mm 3. Filip Screw Drive Cetus MK2 to MK3 Part List BC0881 item SKU Name Spec QTY 1 25007 T-nuts M3×10mm 2 2 25119 Cable tide 64mm,adjustable st...

  • Cetus MK2 Homing Calibration - How to fix sudden chattering of axis during initalization.

    This is specific problem occur on Cetus MK2 machine, MK1 and MK3 Cetus do not have this issue. The problem is due to the homing mechanism cannot be triggered. The result is continuous search of hom...

  • 8.2 Custom Material Profile ( UP Studio V2.6.43 or later)

    Start from UP Studio V2.6.43, the material profile manager was update to have provide more options and improved user interface. The basic operation remain the same, consist of 3 steps: 1. Copy from...

  • Cetus ROM Update

    For some circumstances, users may need to update the ROM of the printer. (eg. have a CPU not matching the product.) Here we provide the ROM files and a CPU Utility Program to let user update ROM of...

  • CPU Rescue

    Due to unknown reason, in rare cases, the CPU could be lockup into a "Safe Mode", which result in a situation that the printer will able to be detected by computer but unable to respond to any comm...

  • List of UP Studio Supported Gcodes

    G0: linear MoveG1: fast linear move G4: Dwell G28: Move to Origin (Home) G90: Set to Absolute Positioning G91: Set to Relative Positioning G92: Set Position, only support A axis reset. M0: Stop or ...

  • Chapter 4. Installation Guide of Extension PCB for Cetus MK3

    The extension PCB is required for adding heated build platform and True-touch autoleveling probe. If you are going to add these upgrades, please read this guide first. User May also interested  in ...

  • Extruder Maintenance for UP BOX/BOX+

    The extruder design for UP BOX, UP BOX+ and UP300 are quite similar. So the description in the article could be referenced by users of these printer models. 1. Withdraw any filament currently load ...