Joshua Chang
- Total activity 187
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 97
Articles
Recent activity by Joshua Chang-
Choosing and Installing Build Plate
Choosing Build Plate UP mini 2 ES offers two types of build plate, UP Flex (Left) and UP Perf (Right). Each of them provides unique print surface characteristics. TYPE UP Perf UP Flex ...
-
Air Filter Replacement
It is recommended to change the HEPA filter in the filtration unit for every 300 hours of usage or 6 months.
-
Unboxing your UP mini 2 ES
1. Remove the top foam. 2. Take out Accessories Box and other Quick Start Guide in the top foam. 3. Use the printer handle to lift the printer from the box. 4. Remove the foams inside the print...
-
Compliance
FCC ROHS CE
-
Printing Environment
As light odor will be produced during printing, please run the printer in a well-ventilated envi- ronment.The UP mini 2 ES's ideal working temperature is between 15°C and 30°C with a relative hu...
-
Safety Precautions
1. The UP mini 2 3D printer requires the power adapter provided by the original manufacturer, otherwise the machine could be damaged or even cause fire hazard. Please also keep the power adapter aw...
-
Software Version and Update
Check Auto Update to allow the software to inform the user the latest version.
-
Printing Techniques
1. Ensure optimal nozzle height. If the nozzle height value is too low, it will cause warping; if it is too high, it will crash the nozzle into the platform,causing damage and clogging. You can man...
-
Extruder Maintenance
It is not necssary to remove the extruder cover if order to remove the nozzle. However if you want to, you can do so by removing the two philip screws (circled). Unplug the fan socket and pull...
-
Load Filament
Take out the filament spool from filament station. Open the package, use a Pliers to clean cut the end with a sharp edge. Insert the filament into filament guiding tube, insert the filament and th...