Joshua Chang
- Total activity 187
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 97
Articles
Votes on activity by Joshua Chang-
1. Install UP Studio
Download the latest software at: https://www.tiertime.com/software/ System requirement: Operating system: Windows 7(sp1) or above, Mac os10.10 or above. Hardware information: Graphics card require...
-
How to fix the error "model out of print range"
Three possibilities that could cause the out of boundary issue. 1. Model is bigger bigger than the print volume. If model going beyond any of the xyz axis range, this error will occur. Resize ...
-
How to change the nozzle diameter in Up Studio?
The Nozzle Diam options only open for BOX, BOX+,UP300,X5 Cetus printer and some other models coming up. For the following printers, UP mini 2, UP mini 2 ES, UP Plus 2 and etc, the nozzle diameter i...
-
UP Studio cannot be installed due to unsigned driver issues.
Sometimes when installing the UP Studio, the progress failed because of unsigned driver issue.Users can take a look on this article on how to continue the installing. Following are the 3 different...
-
Can not find the printer in the printer list connected to WI-Fi?
If this is your first time using the UP Studio Software, you need to allow the software get through the firewall software when the firewall gives out the warning (The figure below shows the warning...
-
How to set up the printer connect wifi?
Tiertime 3D printers can be setup the connection with the Wi-Fi network either through UP Studio software, or through the touch screen if the machine comes with one. The printer without touchscreen...
-
Can not register or login the Up studio
1.Go to Settings, select Network Settings, uncheck Socket, and check HTTPS2. You can also set up the HTTPS Proxy.
-
How to fix the "USB device not recognized"in Up Studio?
It is caused by the outdated driver. You need to reinstall the driver for the printer. Go to UP Studio page and download the matching Driver File to your computer system. Copy the directory path i...
-
How to adjust the nozzle tempretures?
Yes, you can set the customized nozzle temperature using UP Studio software. Open UP Studio on your computer, click UP at the left menu bar, go to the Maintenance section, find Material, click Cust...
-
How to activate the printer
1. Activation is needed for every Tiertime printer in order to have better customer support. 2. Log in in the software to activate the printer. Log in, go to My Account, find the connected printer ...