Joshua-Chang
- Total activity 187
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 97
Articles
Votes on activity by Joshua-Chang-
What is the function of this spare part?
If you found this part in the package and confused about what is this part and where to install it ? This part is used to installed under the x axis stepper motor, By adding this parts can prevent ...
-
What is the Nozzle Offset and how it works?
The Nozzle Offset a quick way to modify the nozzle height value while keep the original value unchanged. Changing the Nozzle Offset will not affect the Nozzle Height saved in the software. However...
-
Set up Path Width, Change Print Quality
I believe that, sooner or later you will encounter such problem; there are small gaps in the surface of the prints, even if it does not affect anything, but people with obsessive about detail will ...
-
The Preheat Function in Maintenance and in Print Setting
1. The Preheat in Maintenance, By selecting the preheat in Maintenance,The build plate will start heating,You can choose the heat time from 15min to 60min. When the time is up,The heating will stop...
-
8.1. Material Profile Manager (v2.6.3 or earlier)
Overview The Material Profile Manager is a companion software for the advanced users who are seeking more controls over printing parameters. In the latest release, UP Studio 2.5 BETA introduced Ma...
-
Printing with ''Thin Wall'' Option
In this article we will share a typical case when printing thin wall model, One of our customer ask why the model show incompeleted in print perview, Please see the photo below; The reason for...
-
Chapter 2.2 Assemble of Printer Chassis and Mainboard
Setting Up Cetus MKIII Step 1：Install Z-axis Structure When installing the Z-axis, first align the Z-axis mounting hole with the X-axis mounting hole, and then screw the 3 screws in turn. After th...
-
How to prevent warping when printing with ABS?
The possible reason for the warping of ABS could be the build platform is not leveled well. If there are big variations, eg >1mm difference. I would recommend leveling the build platform manually ...
-
Printing Techniques
1. Ensure optimal nozzle height. If the nozzle height value is too low, it will cause warping; if it is too high, it will crash the nozzle into the platform,causing damage and clogging. You can man...
-
Detailed Guidance on Extension Board Installation and Limited Switch Issues
This artical is aiming to provide some detailed guidance on installing the Extension board and solving some frequently occured issues after installed the extension board. We will focused on the ca...