Avatar

Joshua Chang

  • Total activity 113
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 59

Activity overview

Latest activity by Joshua Chang
  • Avatar

    Joshua Chang created an article,

    Frequently Asked Questions

    My printer began to jam very frequently The nozzle gets stopped up. The metal tube (going from the motor gear to the heater block) to be bent. The nozzle/nozzle heater needs to be replaced. Pleas...

  • Avatar

    Joshua Chang created an article,

    Upgrade UP300 Touchscreen

    Manual Upgrade via USB Drive:  We recommend you update your printer’s touchscreen program before your first print. Please follow the instruction below to update your touch screen program with a ...

  • Avatar

    Joshua Chang created an article,

    UP mini User Manual

  • Avatar

    Joshua Chang created an article,

    UP300 Quick Start Guide

  • Avatar

    Joshua Chang created an article,

    Specification Table

      Printer Printing Technology MEM (Melted Extrusion Modelling) Extruder Single Nozzle Diameter 0.4mm Extruder Maximum Temperature 299℃ Extruder Maximum Travel Speed ...

  • Avatar

    Joshua Chang created an article,

    Material Profile Manager

    Overview  The Material Profile Manager is a companion software for the advanced users who are seeking more controls over printing parameters. In the latest release, UP Studio 2.5 BETA introduced Ma...

  • Avatar

    Joshua Chang created an article,

    Fix Errors

    Fix Errors: to fix model errors which can be detected by the software. Tool: The model error will indicated in colour red. Click “” to let the software fix.

  • Avatar

    Joshua Chang created an article,

    4. Set Nozzle Height

    Take out Calibration Card, place it on the build plate.  Go to Calibrate -> Manual Then follow the software guidance to finish and confirm the printer's nozzle height.       

  • Avatar

    Joshua Chang created an article,

    Advanced Print Settings

      Top and Bottom Surface: the number of layers at the sealing the top and the bottom of the printed object. Threshold Angle: This determines at which angle the Surface layers start to be printed Su...

  • Avatar

    Joshua Chang created an article,

    5. Change Materials

    Select the type of Material  Input Material Weight Extruder and then Withdraw Choose the correct Nozzle Dimanier and Print Board installed on the printer.