Joshua Chang
- Total activity 187
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 97
Articles
Recent activity by Joshua Chang-
How to close you account on Tiertime website
Due to certain reasons, Like the email address changed or other reasons, Some users may want to close their account, It is easy to close the current account . First , Go to www.tiertime.com and...
-
Printing with ''Thin Wall'' Option
In this article we will share a typical case when printing thin wall model, One of our customer ask why the model show incompeleted in print perview, Please see the photo below; The reason for...
-
Set up Path Width, Change Print Quality
I believe that, sooner or later you will encounter such problem; there are small gaps in the surface of the prints, even if it does not affect anything, but people with obsessive about detail will ...
-
Chapter 1. Cetus MKIII 3D Printer Parts Introduction
Cetus MK3 Standard Version Cetus MK3 Extended Version 1.1 Introduction to Cetus 3D MK3 Printer Parts: 1.1.1 The core components of th...
-
How to solve non-Administrator users cannot operate the software in a domain/school network?
Under some domain network surrounding,Like in a school or a liberatry network, A non-administrator can not operate the UP studio due to the non-administrator user can not read the system files. We...
-
The Preheat Function in Maintenance and in Print Setting
1. The Preheat in Maintenance, By selecting the preheat in Maintenance,The build plate will start heating,You can choose the heat time from 15min to 60min. When the time is up,The heating will stop...
-
Where to download the Mac Version 2.4 UP studio and how to activate it?
The link for download the old Mac Version 2.4 UP Studio Global users download link: https://s3-us-west-1.amazonaws.com/up3d/downloads/UP_Studio_V2.4.1.pkg Chinese users download Link:https://c...
-
Guidance 2: Replace the door checking hall switch on UP BOX/BOX+
Tools Needed: Cross Screwdriver. Step 1: Unplug the hall switch plug wire from the switch board. The white one marked with Door Check. Step 2: Screw out the screw from the printable part from th...
-
Replacing the Extrude Head of UP BOX/BOX+.
Tools Needed: 3mm allen wrench Step1: Withdraw the filament and unplug the extrude cable Step2. Screw off the screw in the left bottom of the extrude with a 3mm allen wrench,For the UP BOX,...
-
Why Mac Vers.2.4 UP Studio Show "Please Activate" all the time?
For the users using Mac Version 2.4 UP studio,When the software reminder you activate, You need download the LKD2.4 file and Activate the software by import the downloaded LKD file to finish the ...