Jason Wu
- Total activity 167
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 1
- Subscriptions 87
Activity overview
Latest activity by Jason Wu-
Jason Wu created an article,
UP Studio 3 Advance Mode
To open Advance Mode to access all parameters. Go to Upper left "UP Studio 3" main menu => Preference Check the "Advanced UI" option and restart the program. When advanced UI activated, user ...
-
Jason Wu created an article,
Cetus2 Supported Gcodes and Custom Commands
G command. G0 : Quick Move command G1 : Synthetic motion command G1 X100 Y100 F3000 G4 : Pause command. G4 S2 (pause 2 seconds) G4 P300 (pause 300 milliseconds) G28 : Zero return command, etc: G28 ...
-
Jason Wu created an article,
Use Cura to Slice for Cetus2
Start from firmware version 1038, Cetus2 able to execute Gcodes from thrid party slicers. A few things to note:1. If the firmware update does not work, you can rollback to previous version. It can ...
-
Jason Wu created an article,
Cetus2 Extruder Head Dive into Bed?
The Z-axis homing depends on a magnet on the front shield (metal cover of Z-motor) and a Hull Effector sensor (magnetic sensor). When the printer home the Z-axis, the magnetic sensor will approach ...
-
Jason Wu created an article,
-
Jason Wu created an article,
-
Jason Wu created an article,
Replacing X-Axis Transition PCB
1. Unplug the large ribbon and the small black ribbon cable. 2. Remove the 3 screws that hold the X-axis. 3. Remove the 2x screws that hold the metal cover. 4. Remove 2x Screws that holding...
-
Jason Wu created an article,
-
Jason Wu created an article,
-
Jason Wu created an article,
Cetus2 UnBoxing and Installation Video Instruction
Part.1 - Assemble the hardware Part.2 - Leveling the Printer Part 3. Import Config File Config File Download: www.cetus3d.com/software