Jason Wu

  • Total activity 176
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 2 users
  • Votes 1
  • Subscriptions 91

Activity overview

Latest activity by Jason Wu
  • Jason Wu created an article,

    Cetus2 Color Mixing Guide

    Video Tutorial   Extruding ratio definiation T0 P0.5 T0 = extruder1, T1 = extruder2. P0.5 means T0 will extrude at 0.5 ratio of total extrusion. While the rest of the extrusion will fill up by the...

  • Jason Wu created an article,

    Painting STL Model with Facet Selection and Painting

    UP Studio3 has a set of facet selection tools that allow users to select specific polygons/surfaces and then convert them into submodel for multi-color printing. User can use a paint brush to selec...

  • Jason Wu created an article,

    Adding Image/Texture Map to STL models using UP Studio 3

    UP Studio 3 has a texture mapping tool that able to project an custom image onto the surface of a STL model. Here we provide a step by step tutorial showing how to do this.   1. Load a STL model  ...

  • Jason Wu created an article,

    Dual Extrusion Filament X Warning

    This error prompt is generated by filament monitor module. If filament feeding is interrupted and detected by the module, the printer will pause the print and display this error message on the scre...

  • Jason Wu created an article,

    UP Studio 3 Quick Start Guide by Arnold Cruz

        Thanks Arnold for this great tutorial. for interested party may follow him at: https://roadtonirvana.net/  

  • Jason Wu created an article,

    UP Studio 3 Advance Mode

    To open Advance Mode to access all parameters. Go to Upper left "UP Studio 3" main menu => Preference     Check the "Advanced UI" option and restart the program. When advanced UI activated, user ...

  • Jason Wu created an article,

    Cetus2 Supported Gcodes and Custom Commands

    G command. G0 : Quick Move command G1 : Synthetic motion command G1 X100 Y100 F3000 G4 : Pause command. G4 S2 (pause 2 seconds) G4 P300 (pause 300 milliseconds) G28 : Zero return command, etc: G28 ...

  • Jason Wu created an article,

    Use Cura to Slice for Cetus2

    Start from firmware version 1038, Cetus2 able to execute Gcodes from thrid party slicers. A few things to note:1. If the firmware update does not work, you can rollback to previous version. It can ...

  • Jason Wu created an article,

    Cetus2 Extruder Head Dive into Bed?

    The Z-axis homing depends on a magnet on the front shield (metal cover of Z-motor) and a Hull Effector sensor (magnetic sensor). When the printer home the Z-axis, the magnetic sensor will approach ...

  • Jason Wu created an article,

    Replaceing X-Axis Ribbon Cable